This is a heavy duty belt using Herman Oak Pre-dyed leather. The solid brass buckle is attached with Chicago screws, so that you can remove or change the buckle at will. Make sure you periodically tighten the screws. We sell extras in the accesories section of the store. The belts have seven holes, spaced 1" apart, standard. The belts come with a wide Square Buckle & two leather keepers.
Take an existing belt and lay it flat, measure from the end of the buckle to the hole that you use most. This number will be larger than your waist size, this is normal. Don't measure a belt that stretches. Again don’t over think this. Double check by running the tape measure around your waist through the belt loops with no belt on.
If you GUESS and GET IT WRONG WE WILL CHARGE FOR A NEW BELT.
NO RETURNS ON SHIPPED BELTS.
Guys: if you have over a 48" waist measurement, we highly recommend a 1.75" belt. This will avoid the "kite string" around the grain sack effect. The wider belt will be far more comfortable for you.
We make thousands of belts correctly, if you give us the correct measurement. We don't want a pant size, or an overall length, your best guess or an estimate of what you want your waist size to be... please measure twice, so that we can cut once, accurately.